Kreem Gas Tank Sealer and Liner Kit

Posted on: April 6th, 2013 by Road Rider MCA No Comments


For all those do-it-yourselfers and project builders out there, Road Rider carries Kreem Gas Tank Sealer Kits and tank liner products. Older bikes, and especially ones that have been sitting unused for long periods of time, often develop dreaded gas tank rust. The Kreem Combo Pack is an inexpensive solution to the rust epidemic, which, if left untreated, will clog up your carburetors and your fuel filter repeatedly, worsening with time.

The Kreem Combo Pack is a three stage system for tank cleaning, and will enable you to completely clean out rust from the inside of the gas tank, protect the outside during the procedure, and coat the inside with a protective and permanent sealant.

Included in the Combo Pack:

  • Enough for a complete treatment of average size tanks (under 20 gallons)
  • 1 pint Tank Prep A: Apply the Tank Prep A to the outside of the tank to protect it from damage while you’re working
  • 1/2 pint Tank Prep B: Thoroughly clean and rinse out the inside of the the tank with Tank Prep B
  • 1 pint Fuel Tank Liner: Pour in the Tank Liner and roll around to evenly coat the entire tank

To successfully line the gas tank after cleaning, it is important to take time during the preparation stage. Be sure to remove all the rust, dirt particles, and residue completely. Once you’ve applied the liner, we highly recommend allowing the tank to cure for as long as possible, ideally at least double the suggested cure time.

The Kreem Fuel Tank Liner System really works when done with care, will save you money, and will help keep your bike on the road and running like a champ.

If you are using Kreem for the first time, or have any questions, our Parts Technicians can give you some great tips to help ensure the best result.



Leave a Reply


+ three = nine